Printrbot Plus V2

Print Jet: Single
Layer Thickness: 2 mil
Print/Creation Size: 10′ x 10′ x 10′

Category:

Description

The updated 1504 model has updated metal parts including, but not limited to: increased support for the extruder motor wiring, access to the Printrboard reset button, and a sweet PB logo on the back of the print bed.The Printrbot Plus is constructed of powder coated metal and machined aluminum with open platform for fabricating parts up to 10 x 10 x 10 inches using 1.75mm PLA filament. The printer head moves on the X (left to right) and Z (up and down) axes, while the heated print bed moves on the Y (backward and forward) axis. The Mic 6 aluminum bed is extremely flat and works with an Auto-Leveling Probe with the user-chosen software to calibrate the height of the print head. The Plus comes with a 1.75mm ceramic Ubis Hot End. The printer uses open source software and connects to the computer using the included mini-USB cable. Using a micro-SD card (sold separately), the printer can be disconnected from the computer for untethered printing during long print jobs.Linear rails and carts for stability and smooth movement of the print head and bed. The GT2 belt and aluminum pulley system facilitates precise movement of the print head and bed. The NEMA 17 stepper motors meet the National Electrical Manufacturers Association (NEMA) standard ICS 16-2001.Printrbot Plus comes with Metal Power Tower with Metal Spool Rack to encase the provided ATX power supply.*Prototype description and photos. Final product may vary.Technical Specifications:Model: 1504 / 1412Build Volume: 10? x 10? x 10? / 254mm x 254mm x 254mmPrint Resolution: 100 MicronsPrint Speed: 80mm / sec max recommendedFilament: 1.75mm PLA (sample included) and ABSExtruder: Alu Extruder (direct drive). 1.75mm Ceramic Ubis Hot End with 0.4mm nozzleAuto Leveling: Auto-Leveling Probe works with software to calibrate Z axis height (see video)Print Bed: Heated: Max temperature of 80CConstruction: Powder coated steel and aluminum bodyRails: 12mm Linear RailsBelt: GT2Pulleys: 20 tooth, dual flange GT2 aluminumElectro…
Print Jet: Single
Layer Thickness: 2 mil
Print/Creation Size: 10′ x 10′ x 10′
Maximum Print Speed: 3.15 in/s
Filament Diameter: 68.9 mil

Additional information

Brand

EAN

EANList

ItemDimensions

Label

Manufacturer

Model

MPN

PackageQuantity

PartNumber

ProductGroup

Publisher

Studio

UPC

UPCList